Copyright 2002 Quantum Corporation. All rights reserved. ATL Tape Libraries, and Prism Storage Architecture are trademarks of Quantum Corporation registered in the U.S.A and
other countries. Products mentioned herein are for identification purposes only and may be registered trademarks or trademarks of their respective companies. All other brand names
or trademarks are the property of their respective owners.
PN T6473047-01, Ver. 1, Rel. 0
6207947-02sN 01
Tandberg Data GmbH
Feldstr. 81, D-44141
Dortmund
Germany.
Tel: +49 231 5436 0
Fax: +49 231 5436 111
Tandberg Data ASA
KjelsÂsveien 161
P.O. Box 134 KjelsÂs
N-0411 Oslo
Norway
Tel: +47 22 18 90 90
Fax: +47 22 18 95 50
Tandberg Data S.A.S.
16/18 Ave.
Morane-Saulnier
F-78941 VÈlizy Cedex
France
Tel: +33 1 39 26 01 01
Fax: +33 1 34 65 02 89
Tandberg Data (Asia) Pte. Ltd.,
801 Lorong 7
Toa Payoh #02-00
Singapore 319319
Tel: +65 259 9330
Fax: +65 258 1702
Tandberg Data (Japan) Inc.
Shinkawa-nittei Annex Bldg., 7th floor,
22-4 Shinkawa 1-chome, Chuo-ku
Tokyo 104-0033 Japan
Tel: +81 3 5566 2871
Fax: +81 3 5566 2875
--
Wait about one minute after modfying these parameters and then restart the library.
STEP 5:
CREATE SCSI BUSSES AND SCSI-TO-FIBRE CONNECTIVITY
If you installed a Fibre Channel bridge, establish SCSI-to-Fibre connectivity as explained in the
Quick Reference Guide
for the
Fibre Channel bridge.
STEP 6:
CONFIGURE THE RMC
Once installed, configure the RMC using the instructions found in the
M-Series Remote Managment Card User’s Guide,
P\N T6473046.
N
OTE
:
As a third option, you can configure a host computer (such as a laptop) to be compatible with the default static
IP address of the RMC. To do this, wait appropriately 30 seconds after starting the library for the DHCP request from
the RMC to time out. The RMC then assigns itself the static IP address of
192.168.1.1
.
Set the following parameters on the host computer:
--
IP address:
192.168.1.2
--
Subnet mask:
255.255.255.0
--
Gateway:
default settings for the computer
Using a PING command, verify communication between the host computer and the RMC.
