Tandberg Data MSERIES USER, User Manual, Page: 108 / 190

Chapter 7 Running the Demonstration Programs
Running the Confidence Test Program
92 Tandberg Data M-Series User’s Guide
Figure 60 Demo
Programs Screen
Running the Confidence Test Program
7
The
Confidence Test
program moves a data cartridge to each tape drive,
each magazine, and the fixed slot. The test ends automatically when the
cartridge has been placed in all tape drives, magazines, and fixed slots in
the library.
To run the
Confidence Test
program:
1
Load a single data cartridge into the top left magazine.
2
Access the
Demo Programs
screen (see Accessing the Demo Programs
Screen ).
3
Press the
Up
or
Down
buttons to select
Confidence Test
.
4
Press
Select
.
The
Confidence Test
program ends automatically when complete.
Note:
Leave all the other magazine slots empty.
Tandberg Data