tams elektronik
MT-1 | MT-2 | MT-3
English
6. Assembling the kit
You can skip this part if you have purchased a ready-built module or device.
Preparation
Put the sorted components in front of you on your workbench.
The separate electronic components have the following special features
you should take into account in assembling:
Resistors
Resistors reduce current.
The value of resistors for smaller power ratings is indicated
through colour rings. Every colour stands for another
figure.
Carbon film resistors have 4 colour rings. The 4th ring
(given in brackets here) indicates the tolerance of the
resistor (gold = 5 %).
Value:
Colour rings:
1 k
brown - black - red (gold)
3,3 k
orange - orange - red (gold)
4,7 k
yellow - violet - red (gold)
5,6 k
green - blue - red (gold)
10 k
brown - black - orange (gold)
47 k
yellow - violet - orange (gold)
330 k
orange - orange - yellow (gold)
Seite 13
Summary of Contents for MT-1
Page 24: ...t a m s e l e k t r o n i k English MT 1 MT 2 MT 3 Fig MT 1 1 MT 1 Connections Seite 24...
Page 27: ...t a m s e l e k t r o n i k MT 1 MT 2 MT 3 English Fig MT 2 1 MT 2 Connections Seite 27...
Page 30: ...t a m s e l e k t r o n i k English MT 1 MT 2 MT 3 Fig MT 3 1 MT 3 Connections Seite 30...