![background image](http://html2.mh-extra.com/html/tams-elektronik/hades/hades_manual_3474754016.webp)
tams elektronik
HADES
t
a
ms elektronik
3.2. Turnouts
You can use the following as entry turnouts:
coil-driven turnouts: without any additional components
motor-run turnouts: in combination with adapter AMW-1 or AMW plus
servo-driven turnouts: in combination with additional modules controlling servos (e.g. servo
decoder SD-32).
The exit turnouts must allow to be cut open by departing trains.
3.3. Transit track or stopping section
In order to prevent accidents when all sidings are fully occupied, you have to choose one of
two safety measures:
Transit track: An incoming train first has to pass all entry turnouts leading to the sidings
before it directly departs from the staging yard when all sidings are occupied.
Stopping section at the entrance to the staging yard: The section is switched currentless
when all sidings are occupied. If you want to install a stop signal in front of the stopping
section, you can switch it together with the stop section.
Examples → Section 2.3
Example 1: Staging yard with 6 sidings and one through track
Example 2: Staging yard with 6 sidings and a stopping section at the entrance
16 | Setting-up the staging yard