Booster B-6
t
a
ms elektronik
7. Update
In order to adapt the booster to new developments, a software update can be carried out for
the B-6 via BiDiB.
Required accessories
You will need a BiDiB interface (e.g. ZEUS) or a digital control unit with integrated BiDiB
interface (e.g. mc²) as well as PC control software that supports BiDiB and the update
function. Alternatively, free BiDiB add-on programs are available with which updates can be
carried out (e.g. BiDiB Monitor or BiDiB Wizard).
Carrying out an update
Switch off the track voltage (B-6 to "STOP").
Start the corresponding programme item and follow the instructions.
While the update is being executed, the RGB LEDs light up in violet and the displays change: |
|| and - -
The B-6 automatically switches back to standard operation after the update. The CV settings
are reset to the factory settings during the update.
Problems during an update
In rare cases, the update may not complete correctly and the B-6 may not return to standard
operation. In this case, the complete software of the B-6 must be deleted and reloaded.
If the update with the BiDiB Wizard software fails, the boot loader is started automatically. If
you use another software that does not start the bootloader automatically, proceed as follows:
Turn off the power to the B-6.
Press and hold the STOP-GO button and switch the power back on.
Now the boot loader is started and the complete software of the B-6 is deleted. Then carry
out an update via BiDiB.
Update without BiDiB
If you cannot carry out the update yourself, send us your B-6 for an update (free of charge
for you). You only have to bear the costs of sending it back and forth.
36 | Update
Summary of Contents for B-6
Page 45: ...tams elektronik Booster B 6...
Page 46: ...Booster B 6 tams elektronik...
Page 47: ...tams elektronik Booster B 6...
