tams elektronik
t
a
ms elektronik
S88-3
4. Connections S88-3
Pin assignment
IN
RJ-45 socket for the connection of
a downstream s88 module
OUT
RJ-45 socket or 6-pole connector
for the connection of an upstream s88 module or digital device
1 … 16
Inputs for mass contacts
X2
Earth connection (if necessary)
Connection digital devices and s88 feedback modules
The S88-3 has two RJ-45 sockets (IN, OUT) to connect commercial Ethernet patch-cables (RJ-
45 cables), which allow an interference free connection to other feedback modules or digital
devices in accordance with the s88-N standard.
Use a 6-conductor connecting cable for the connection of digital devices or upstream
customary feedback modules which you connect to the 6-pole connector of the S88-3.
Alternatively you can use an adapter S88-A (optional extra) for the connection via a patch-
cable.
To connect downstream feedback devices with 6-pin s88 connection, you need an adapter
S88-A and, if necessary, a 6-pin ribbon cable (→ section 1.3.).
Connections S88-3 | 15
