Tamron MP3010M-EV, Technical Reference Manual

Page: 15 / 79

Tamron Co., Ltd.
15 / 79
3.4 Image Stabilizer
Switching On the Image Stabilizer function reduces image blurring caused by, for
example, vibration, which allows you to obtain images without much blurring.
A correction effect is possible for a vibration frequency of around 10Hz. The Image
Stabilizer function employs the digital zoom system, so the angle of view and
resolution are changed, but the sensitivity is maintained.
Hold Function of Image Stabilizer
With the Image Stabilizer function, suddenly stopping high-speed movement (pan, tilt,
etc.) of the camera produces a blur sensor counteraction that may cause image
movement. In such a case, you can use a command setting (hold) to maintain the
correction of the Image Stabilizer function. In this case the image stabilizer is off, but
there is no change in the angle of view.
Note:
The handshake correction function may not work correctly under the condition that
high-frequency vibration component exits. In such a case, set the image stabilizer
function to Off.