background image

12 

 

6    WARRANTY   

 

This  machine  is  guaranteed  against  defects  in  materials  and  workmanship  by  the  Manufacturer  for  a 

period  of  one  (1)  year from  the  date  of  original purchase from an  authorized  distributor  of  Tamerica 

Products,  Inc.    If  you  perceive  or  experience  any  issue  with  the  machine,  kindly  report  it  to  the 

distributor  within  10  business  days  of  said  purchase  to  avail  of  free  pickup  and  redelivery  from 

Tamerica’s  Service  Center.    After  the  first  10  days,  you  will  either  receive  service  instructions  and 

parts via mail free of charge for the duration of the warranty.     

 

Note  that  when  returning  the  machine  for  warranty  claims,  the  machine  should  be  returned  in  its 

complete  original  packaging  to  avoid  incidental  or  consequential  damages  that  may  void  the  claim.   

A copy of the invoice or other proof of purchase also needs to be sent with the machine. 

 

Upon  evaluation  of  the  machine  and  the  determination  of  the  actual  defect,  the  machine  will  be 

restored to its regular working condition by the Service Center and shipped back to you free of charge.   

If you change your mind and simply want to return the machine, a 20% restocking fee is charged even 

within the 10-day grace period.    Further, you will have to cover freight to return the machine and it 

has to be in brand-new resalable condition, otherwise, you might incur more charges. 

 

This  warranty  covers  all  defects  incurred  in  the  normal  use  of  the  equipment  except  in  the 

following cases: 

 

1.

 

  Loss or damage to the equipment due to improper operation, abuse, mishandling or failure to 

follow the operating instructions. 

2.

 

  Removal or alteration of the serial number. 

3.

 

  The  machine  being  serviced  or  modified  by  anyone  other  than  a  certified  technician 

authorized by TAMERICA. 

 

This  warranty  expresses  the  entire  obligation  of  the  Manufacturer.  Unless  prohibited  by  law,  neither 

this  warranty  nor  any  other  warranty  expressed  or  implied,  including  implied  warranties  of 

merchantability, shall extend this warranty period. Again, no responsibility is assured for incidental or 

consequential damages. 

 

This warranty is valid only within the United States, or its provinces and territories. 

 

 

Summary of Contents for TCC1200














Reviews: