![background image](http://html1.mh-extra.com/html/tamerica/tcc1200/tcc1200_operating-manual_3444670011.webp)
10
USER DISENGAGES ROLLERS
OR
TURN THE MOTOR CONTROL
SWICH TO STOP POSITION, AND
LEAVE THE MACHINE
UNATTENDED.
PCB DETECTS THE MACHINE IS
STOPPED AND IT STARTS
COUNTING TIME.
USER RETURNS AND ENGAGES ROLLERS
OR TURN ON THE MOTOR SWITCH
WITHIN 60 MINUTES PERIOD. PCB STOPS
COUNTING TIME
H. AUTO SHUT-OFF FUNCTION
This machine is equipped with an auto shutoff feature. When using the machine with this feature, turn
on the Auto Shutoff Switch found on the left side panel. The following is a step by step diagram of its
operation:
CONTROL PROCESS FOR AUTO SHUT OFF
STAGE 1
STAGE 2
STAGE 3
STAGE 4
REMARK:
1) AT STAGE 3, THE MACHINE WILL BE ON STANDBY MODE. A LOW BEEPING SOUND WILL BE HEARD EVERY 5 SECONDS TO REMIND
THE USER THAT THE MACHINE IS ON STANDBY FOR A FEW MORE MINUTES BEFORE COMPLETELY SHUTTING OFF.
2) AT STAGE #4, THE MACHINE IS OFF BUT THE POWER SWITCH IS AT THE "ON" POSITION.
USER NEEDS TO TURN THE POWER
SWITCH OFF AND THEN ON AGAIN TO RESTART THE MACHINE.
PRESS THE HOT BUTTON TO RETURN TO PREVIOUS
TEMPERATURE. CONTINUE THE LAMINATION JOB AS SOON AS PREVIOUS TEMPERATURE IS REACHED.
3) TO DISENGAGE AUTO SHUTOFF FUNCTION, TURN “AUTO SHUTOFF” SWITCH OFF.
USER CAN START
LAMINATING AGAIN
TEMPERATURE STARTS COOLING
DOWN TO 212°F (100°C) AFTER 60
MINUTES PERIOD. (IF SET
TEMPERATURE IS UNDER 212°F
/100°C, TEMPERATURE WILL STAY
AT THE SAME.)
USER RETURNS AFTER 60 MINUTE
PERIOD, ENGAGE THE ROLLERS
OR
TURN ON THE MOTOR SWITCH.
PCB
STOPS COUNTING, TEMPERATURE
GOES TO PREVIOUS SETTING
USER CAN START
LAMINATING AGAIN
MACHINE TURNS OFF
AUTOMATICALLY AFTER
ANOTHER 30 MINUTES.