background image

- 23 - 

 
1. When returning the machine for claims or warranty repairs, it should be returned in its complete, original packag-
ing  to  avoid  incidental  or  consequential  damages  that  may  discredit  the  claim  or  void  the  warranty.    A  copy  of  the 
invoice or other proof of purchase also needs to be sent with the machine along with a Return Authorization Number 
which should be clearly printed on the box.   
 
2.  Upon  evaluation  of  the  machine  and  the  determination  of  the  actual  defect,  the  machine  will  be  restored  to  its 
original working condition by the Service Center and shipped back to you free of charge.  However, should it be evi-
dent that the problems associated with the machine were caused by or were the result of any misuse, abuse, neglect, 
alteration, problems with electrical power, usage not in accordance with product instructions, acts of nature, or im-
proper installations or repairs made by a person other than an authorized Service Technician, you will be charged for 
parts and labor. 
 
Take note that it will normally take us at least 2 weeks to diagnose, fix, and return the machine to you.  It may take 
even longer depending on the problems with the machine and current workload.  Verification of the claimed defect 
by Tamerica Products authorized personnel will be required prior to issuance of proper credit, exchange, or repair. 
 
Kindly contact your dealer for loaner machines for this is something that we do not provide. 
 

Machine Return: 

 
Should  you  change  your  mind  about  your  purchase  and  would  simply  want  to  return  the  machine,  it  must  be  made 
within the first 10 days.  Take note that you are responsible for cost of shipping for the return and a corresponding 
20% restocking fee will be charged.  Furthermore, the machine must be in brand-new resalable condition. If after in-
spection it is found to be defective or has been damaged in transit, we will charge you to repair the machine or you 
shall be responsible to file a corresponding claim with the carrier. 
 
This limited warranty expresses the entire obligation of TAMERICA PRODUCTS, INC. Unless prohibited by law, neither 
this warranty nor any other warranty expressed or implied, including implied warranties of merchantability, shall ex-
tend upon this warranty period. No responsibility is assured for incidental or consequential damages.  This warranty is 
valid only within the 48 Contiguous States, Hawaii and Alaska excluded. 
 

Quick Reference: 

 

1.  All claims must be made within 10 business days after receipt of merchandise.  This statement is printed on all or 
invoices. 
2.  Our products are warranted to be within manufacturer’s specifications, but no warranty of fitness for purpose is 
expressed.  This statement is printed on all our picking sheets. 
3.  Merchandise may not be returned without our approval and an Return Authorization Number (RA). 
4.  A 20% restocking fee is charged on returns.  Exceptions of less than 20% restocking fee may be charged when au-
thorized by management. 
5.  Merchandise shipped from our warehouse is always in good condition and in general, our term of sale is FOB ori-
gin.  If the entire shipment was damaged by a freight carrier while in transit, customer should refuse delivery.  If only 
a  portion  of  the  shipment  was  damaged,  details  of  the  damage  must  be  clearly  indicated  on  the  delivery  receipt.  
Otherwise, claims will not be accepted. 
6.  The exception for item #5 above is “concealed damage” where it is physically impossible to note the damage at 
the time of delivery.  In this case, you must in good faith, immediately inform us or the authorized dealer you pur-
chased  the  machine  from,  about  the  damage/s.    However,  consistent  with  #3  above,  all  claims  must  still  be  made 
within 10 business days after receipt.  
7.  Return freight must be shouldered by you.  Exceptions are as follows: 
      a) We shipped the wrong merchandise 
      b)  The  machine  is  determined  to  be  under  warranty  but  should  be  returned  within  10  days  upon  receipt  of  ma-
chine. 
8.  The machine must be in good, resalable condition. 
9.  While the machine is still under its warranty period, the original packaging must be kept.  If the machine is not in 
its  original  packaging,  cost  to  repair  damages  while  in  transit  must  be  paid  by  the  customer.    Please  note  clear  in-
structions stamped on the box of each machine. 
10. The RA number must be indicated on the carton.  Otherwise, returns will be refused.  Exception:  When a call tag 

Warranty Claims and Procedures 

Summary of Contents for Tamerica TPI-4900E

















































Reviews: