Introduction
Thank you for purchasing this TAMCO X5 1:5 Brushless Buggy. This high performance radio control model car is not a toy and should be used by
someone with previous radio control experience. The X5 is equipped with the latest 2.4ghz radio equipment and a high power brushless motor along
with a matched Electronic Speed Controller. The X5 is capable of very high speeds and combined with its size and construction could cause damage or
harm if used incorrectly. To ensure the safety of yourself and others, please ensure you read the manual fully before operating. Doing so will greatly
reduce the chance of an accident and help prolong the life of your model.
We hope you enjoy many hours of fun with your new model.
Safety Precautions
This product is not a toy, it is a high performance model that can operate at high speeds.
Previous radio control experience is necessary for operating this model.
Avoid excessive amounts of water as this can effect the performance of the electronic components.
Before each use, please ensure you visually check your model and ensure all screws and bolts are tightened before you operate your model.
Please ensure you operate your model in a suitable environment away from traffic and other obstacles.
Remove the battery from the car when not being used for long periods of time.
Always disconnect the battery in between uses.
Avoid touching the motor and speed controller as these items can get hot while in use.
Do not place sharp objects in the cooling fans.
Avoid touching any moving parts.
Always charge the battery on a hard, non flammable surface.
Remove the battery from the car before charging.
Do not throw old battery packs into a fire. Always ensure you dispose of old batteries correctly.
Operational Precautions
Always switch on the TRANSMITTER first, then the RECEIVER.
Always ensure you run your model in a spacious area, or at a dedicated track.
Avoid using your model near crowds, in the road or in limited space.
Always ensure your battery packs are fully charged before use to ensure optimal performance.
Always check that the transmitter and receiver are working correctly before operating fully.
Never “over rev” the car when not under load, i.e being held in the hand, as this can cause various mechanical failures.
Controls
Required & Recomended
Transmitter Battery Installation
Slide the battery cover off to access the
battery compartment.
Insert 8 x AA Batteries into the
compartment, taking care to
match the polarities.
Do not mix battery types or
old and new batteries.
Please ensure you dispose of any old
batteries correctly.
8 x AA Batteries required.
Purchased separately
The TAGT2 features a charging jack which allows you to use rechargeable batteries in the transmitter.
Ensure you insert 8 rechargeable battery packs and follow the chargers instruction book.
Both the charger and the rechargeable batteries will need to be purchased separately.
When charging we recommend that the transmitter is placed on a hard, non flammable surface
and under constant supervision.
The following items are recomended to help with the care and general maintainence of your X5 Brushless buggy.
The following items are Required to operate this model.
8 x AA Batteries LiPo Charger LiPo Charge Safe Sack
Screwdrivers Allen Key Set Pliers Box Spanner Thread Lock
Summary of Contents for X5 1:5 Brushless Buggy
Page 16: ......
