Trouble Shooting and Maintenance
The fan will not run when “Outdoor Temp” is illuminated on the display or, if the humidity lock is on, when the “Outdoor
Humidity” is illuminated
.
This fan will not bring warmer, humid air into the space.
Issue
Reason/Action
CapeBreeZ is Not Running
In Auto Mode, the CapeBreeZ will stay on or off for a minimum of 3 minutes.
Make sure fan is plugged securely into the electrical outlet.
Confirm the set point is less than indoor temperature.
Airflow Decreases
Filter is dirty. Change the filter and adjust reminder settings if necessary.
Changing the filter
The filter should be changed regularly to maximize air cleaning effectiveness. The filter drawer is at the bottom of the
unit. It may be opened with the handle on the bottom or the two finger tabs on the side of the unit. Slide the drawer
completely out of the unit. Slide the cover back to access the filter. Remove the existing filter and replace with a new
one. The filter has a directional indicator for the airflow. The filter should be installed so the airflow moves upward
through it. Close the filter drawer for operation.
Note: Adjust the filter reminder based on the conditions in the area. If
you find the filter becomes clogged/dirty quickly, reduce the hours
between filter changes (SETUP).
The CapeBreeZ ships from the factory with a 12x12x1 MERV8 Media
Filter.
Replacement filters are standard 12x12x1" and may be purchased at
your local home goods or hardware store.
SPECIFICATIONS
Window Requirement: Double hung 15.75 to 36" wide
Opening height 12"
Overall Dimensions: ……………….. 15.75 x 13.5 x 9.75" H
Maximum Room Size: …….…….… 400 sq ft
Fan Speeds: ……………….………….. 5
Electrical Requirements: ……….….115V, 60 Hz, 3A
Power: ………………………………………8 Watts Low/ 17 Watts Average
Unit Weight: …………………….….…..12 lb 15 oz
Shipping Carton:………………………. 18 x 15.75 x 13" OD
Shipping Weight:……………………….16 lb .10 oz actual
17 lb dimensional
5
