TallyGenicom 9050N -, User Manual, Page: 43 / 172

User Manual 3-17
Using the Hole Puncher
Basic Printing Tasks
To save a group of settings in your Printer Properties:
1. Set up your print job by choosing all options in the Printer Properties you wish to reuse.
2. Click the Save button located the Saved Settings pulldown in the Paper tab within your
Printer Properties.
3. Enter a Name for the saved settings.
4. Click OK .
5. Click OK .
To use saved settings:
1.
Select the desired s etting_name from the Saved Settings pulldown in the Paper tab within
your Printer Properties.
2.
Click OK .
Using the Hole Puncher
The optional Finisher contains the Hole Puncher. European finishers have a 2/4 hole punch
while American finishers have a 2/3 hole punch. When the printer detects that the punch waste
box is full, a warning appears on the Operator Panel. Printing will stop until you empty the
waste box.
The most convenient way to enable this feature is by using your Printer Properties. You may
also enable this feature at the Operator Panel or by using the EWS.
To turn hole punching on through your Printer Properties:
1. Click the Layout tab.
2. Select the desired Hole Punch type from the Hole Punch pulldown.
3. Click OK .
Emptying the Punch Waste Basket
See “Jam Area Locations” on page 9-1 for a description of door locations.
1. Open Door G.
2. Remove the Punch Waste Box and empty the contents.