TallyGenicom 9050N -, User Manual

Page: 104 / 172

8-10 User Manual
Network Troubleshooting
Troubleshooting
Unable to obtain the desired Print Results
USING ETHERTALK
This section provides information on the possible causes, verifying methods and recommended
actions pertaining to errors which may occur when the printer is used with EtherTalk. The
printer is not Printing
The data format of the
print job does not
con-form to the printing
environment of the
workstation. (Print data
from the client is of a
binary format.) - Specify PSBIN on the client side for the printer name
on the remote host to print a binary file in the
PostScript language.
The printer has run out of
paper Check the message on
the printer Operator
Panel Load paper into the paper tray
Cause Verification Action
The indicated print
language and the print
language used in the print
data are different. Check that the print
language specified is
the print language used
in the print data. Specify the print language consistent with that used in
the print data.
Cause Treatment
The name (or the default
name) of the printer has
been changed. Cause The Apple Talk function of the printer name if it
detects that a printer of the same name exists on the
network.
Verification Check Chooser to confirm that the printer name has
been changed.
Action Change the name of the printer or change the name of
the other printer to avoid duplicate printer names on
the network.
Cause Verification Action