TallyGenicom 6605, User Manual

Page: 92 / 212

92
Chapter 4
Config Menu
Unsolicit Rpt
This option enables or disables Printer Device Status Reports to be sent to
the host when a reportable status or error condition has occurred.
•
No (default). Disables all unsolicited status reports from the printer.
•
Small. Enables brief unsolicited status reports and sends an extended
status report to the host.
•
Big. Enables extended, unsolicited status reports and sends an extended
status report to the host.
Parallel I/O Submenu
Data Bit 8
•
Enable (default). Allows access to the extended ASCII character set.
•
Disable. The printer interprets bit 8 of each incoming data character as a
zero, regardless of its actual setting.
Data Polarity
The Data Polarity parameter must be set to match the data polarity of your
host computer.
•
Standard (default). Does not expect the host computer to invert the data.
•
Inverted. Expects the data received on the data lines from the host
computer to be inverted. Ones become zeros, and vice versa.
PARALLEL I/O
(from page 70)
Data
Polarity
Data Bit 8 Resp.
Polarity
Busy On
Strobe
TOF Action
Latch
Data On
Prime
Signal
Standard*
Inverted
Enable*
Disable
Standard*
Inverted
Enable*
Disable
Reset*
Do Nothing
Leading*
Trailing
Enable*
Disable
* = Factory Default
Buffer Size
in K
16*
(1-16)