TallyGenicom 6605, User Manual

Page: 83 / 212

Configurations Submenu
83
Code V Grph Den
This parameter allows for graphic items in Code V to be printed in either
single density (Normal) or double density (High). The default is Normal.
Configurations Submenu
Your printer can save up to eight personalized configurations, so you don't
have to recreate configurations you use frequently. In addition, each
configuration you save can be tagged with a label of up to 15 characters. The
Level 2 headings are as follows:
Save Config.
This option allows you to save up to eight configurations to meet different print
job requirements. This eliminates the need to change the parameter settings
for each new job. The configurations are stored in memory and will not be lost
if you turn off the printer. The factory default configuration cannot be changed.
See “Saving Your New Configuration” on page 47 for details.
Load Config.
The printer can store numerous configurations in memory. This parameter
allows you to select and load a specific configuration.
Delete Config.
You can delete one or all of your eight customized configurations. The factory
default configuration cannot be deleted.
CONFIGURATIONS
(from page 70)
Load
Config.
Save
Config.
Delete
Config.
Power-Up
Config.
Auto
Save
Name
Configs
Reset Cfg
Names
CONFIG 1*
CONFIG 2 - CONFIG 8
Factory
CONFIG 1*
CONFIG 2 - CONFIG 8
All*
CONFIG 1 - CONFIG 8
CONFIG 1*
CONFIG 2 - CONFIG 8
Factory
Enable*
Disable
CONFIG 1 - CONFIG 8 CONFIG 1*
CONFIG 2 - CONFIG 8
All
* = Factory Default