TallyGenicom 6605, User Manual

Page: 81 / 212

Graphics Submenu
81
Zero
As an aid in distinguishing zeros from the uppercase letter O you can choose
to have your zeros slashed (Ø). Slashed is the default selection. This
parameter is used by Code V and PGL.
SFCC
This parameter allows you to change the Special Function Command
Character. The Default for this parameter is the ASCII tilde ( ~, Decimal 126,
HEX 7E ) character. Options are 1-255 (Decimal designators for ASCII
characters).
Code V Language
This parameter allows you to select the language character set that will be
used for text output in Code V Graphics Mode. The default is US. The
available selections are:
PGL Language
This parameter allows you to select the language character set that will be
used for text output in Printronix Graphics Mode. The default is ASCII. The
available selections are:
Free Format
This parameter turns on Free Format Mode in Code V graphics whenever a
^PY is encountered. Free Format Mode will remain active until a ^PN or ^O
(Free Format Mode Off) command is received. The default is Off.
Automatic PY
If Automatic PY is Enabled, the printer is automatically in Code V graphics
mode, and a ^PY command is not needed in the file being sent to the printer
to begin Code V graphics. The default is Disabled.
US UK Swedish/Finnish
Norwegian/Dan Japanese German
French Italian Spanish
ASCII German Swedish
Danish Norwegian Finnish
English Dutch French
Spanish Italian Turkish