TallyGenicom 6605, User Manual

Page: 45 / 212

Changing Parameters Example
45
To experiment with navigating the menus, use the example on the next page
as a tutorial.
Changing Parameters Example
A configuration consists of several parameters. The default factory
configuration has a starting set of parameters. In the configuration menu
above, and in all the configuration menus in this chapter, the factory default
values are indicated by an asterisk (*).
Your print jobs may require parameter values which vary from the default
settings. This section provides an example procedure for changing individual
parameter values.
The following procedure shows how to change and save the setting for the
Form Length option from the default of 66 lines to 65 lines. Use these
guidelines to navigate the configuration menus and change other parameters.
Press to confirm selection.
Press simultaneously to lock and unlock the ENTER key.
Lock or Unlock settings of the ENTER key at power is
defined in the Panel Lock Menu. The ENTER key is
unlocked by default.
MENU/ENTER
+
OFFLINE
QUICK
SETUP
OPERATOR
MENU
FONT FORMS VFU
Length
(Lines) Length
(Inches)
66*
(1-255)
11*
(0.1-25.5)
* = Factory Default
Unidirectional
Disable*
Enable
. . .