TallyGenicom 6605, User Manual

Page: 23 / 212

Control Panel Keys
23
VIEW
When the printer is online or offline, pressing this key executes the view or
eject function. A short press of the View key performs the view function. If the
key is held down for more than one second, the eject function is performed.
If online with data in the printer buffer, the data prints and the key functions as
described below.
If in a fault state, this key will be ignored.
•
View Function — a short press of the VIEW key moves the last data
printed to the tractor area for viewing. While in the view state, the
message "Printer in View" displays, and pressing the UP or DOWN arrow
keys moves the paper up or down in 1/72 inch increments. This is done to
align the image within a pre-printed form, for example. Refer to the UP
and DOWN key functions for additional details on the microstep feature.
Pressing VIEW a second time moves the paper back to the adjusted print
position.
•
Eject Function — when the VIEW key is pressed for more than one
second, the behavior will depend on the Quick Access Menu. If the Quick
Access Menu is set to enable, the printer will move the last printed form
as defined in the Eject Distance Menu. When the key is pressed again the
paper will move forward to the next Top of Form. If the Quick Access
Menu is set to disable, the Eject Key press will be ignored.
CLEAR
In a fault state this key attempts to clear the fault. When the fault is cleared,
the printer returns to the offline mode. In Menu mode, the CLEAR key takes
the printer back to offline mode.
When the printer is in offline mode and no fault is present, this key allows
entry into the Clear menu.
Clear Menu
•
Clear Buffers - Clears all buffers. It also resets the application task to its
initial state.
•
Clear All Configs - Copies the Default Configuration settings into all saved
configurations. Any parameters not listed on the Configuration Report,
such as special characters downloaded from the host computer, are
unaffected.
•
Clear Current Config - Copies the Default Configuration setting into the
current configuration. Any parameters not listed on the Configuration
Report, such as special characters downloaded from the host computer,
are unaffected.
•
Clear Reset - The printer controller performs a hardware reset. This can
be used in lieu of cycling power to the printer. As with cycling power, the
Power-up Configuration is loaded as the Current Configuration.