manualshive.com logo in svg

Tally T8024, User Manual, Page: 28 / 266

Share
Download
Tally T8024 User Manual Download Page 28

Pr
inter

 System Settings

2

1

1.1

Adjusting Color 
Registration

Follow the procedure below to adjust the color registration when you first install the printer or 
after moving it to a new location.

Refer to "5.2 Basic Menu Operation" and "Appendix B Control Panel Menu List" for information about the 
operation of the control panel.

Printing the Color Registration Correction Chart

Use the control panel to print the Color Registration Correction Chart.

(Print screen. The printer is ready to print.)

Press the Menu button. The menu screen appears.

(Menu screen)

Press the Set/Eject  or      button once.

Press the      button six times.

Press the Set/Eject or      button once.

Press the      button once.

Press the Set/Eject button twice. 
The Color Registration Correction Chart is printed.
When printing is finished, the print screen reappears.

Press the      button once.

Ready to Print

1:System

Menu

2:Maintenance

Menu

Init NVM

2:Maintenance

ColorRegiCorrect

2:Maintenance

AUTO

ColorRegiCorrect

Correction Chart

ColorRegiCorrect

Summary of Contents for T8024











































































































































































































































































Reviews:

No comments