Tally T8024 User Manual Download Page 138

Page: 138 / 266

5.1 Control Panel Part Names and Functions

112

Con

trol Pa

nel

5.1.3

Buttons

There are eight buttons on the control panel.
Their functions depend on the screen displayed. The functions are as follows:

Name

Print screen

Menu screen

Menu button

Switches to the menu screen.

Closes the menu screen and
switches to the print screen.

buttons

Allows

you to scroll through

menus and menu items.

buttons

Switches to different menu
levels and moves the cursor
between parameters.

Pressing the

button in a

menu moves the menu one
level down. Pressing the

button moves the menu one
level up.

Set/Eject button

Forces the remaining print
data to be output. For details
about this function, refer to
"6.9 Forcing the Printer to
Print Remaining Data (When
Printing is Halted)"

Selects menus and menu
items. Moves the menu one
level down when a menu is
selected. Sets a parameter
when one is displayed.

Cancel/Back button

Cancels printing. For details
about this function, refer to
"3.5 Can celing Printing".

Moves the displayed menu
one level up.

Power saver button

Releases the printer from
power saver mode 2.

Eject

Set

Back

Cancel

Power saver

Summary of Contents for T8024











































































































































































































































































Search results

Summary of Contents for T8024

Reviews:

Tally T8024, User Manual, Page: 138 / 266

Search results

Summary of Contents for T8024

Reviews: