Tally Dascom DL-830
User Guide V1.0
19
2.4.2 Relocate the Gap Sensor
When printing labels or ticket & tag media, activate Gap Sensor in the System Setup menu from
the Configuration Tool or Control Panel. Additionally, relocate the sensor position to match the
media width in use:
1. Open the top cover and unlock the print head.
2. Load new media. (Read Section 2.5.)
3. For labels with liner, move the Black Mark Sensor to a position within the physical label. If
use media with notches, move the Black Mark Sensor underneath a notch.
4. See below photo. Align the two triangular markers on the Gap Sensor and Black Mark
Sensor.
2.4.3 Relocate the (Reflective) Black Mark Sensor
When printing media with black marks or black lines on the back, activate the Black Mark
Sensor in the System Setup menu. Additionally, relocate the sensor position to match the media
width in use:
1. Open the top cover and unlock the print head.
2. Load new media. (Read Section 2.5.)
3. See below photo. Move the Black Mark Sensor directly underneath the black mark of the
media.
4. Move the Gap Sensor beyond the Black Mark Sensor; otherwise, the printer fails to detect
out of media.
