18
JTAG Programming
The module can also be programmed using a JTAG
programmer connected to the black shrouded header
labeled
JTAG (H5) on the module’s PCB. Power must
be supplied separately via a Eurorack power cable
connected to the
POWER (H7) header.
An example of this kind of programmer is the
Olimex
ARM-USB-OCD
. Their
ARM-JTAG-20-10
adapter is also
necessary in order to accommodate the module’s
miniature 0.05″ pitch 10-pin header.
No additional steps are necessary to prepare the
module for programming via this method.
If you are interested in serial or JTAG programming,
please explore the
Vagrant environment for Mutable
Instruments modules hacking
which can be found at
github.com/pichenettes/mutable-dev-environment
Other programming resources can be found at
mutable-instruments.net/t/4336 (
Mac Tutorial: How
to compile and upload the firmware of MIs eurorack
modules
) and at
medium.com/music-thing-modular-
How to get started writing your
own firmware for Mutable Instruments Clouds
), the latter
of which was written for the
Clouds
module but is also
applicable to
Rings
.
