ETP-CI-4G-GSM
– Cellular Interface
Installation Instructions
Page
1
of
5
Rev. 5/12/2021
Copyright 2019-2021 Talk-A-Phone, LLC
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com
All prices and specifications are subject to change without notice. Talk-A-Phone, Talkaphone, bAlert, Scream Alert, WEBS, and WEBS Contact are registered trademarks of Talk-A-Phone,
LLC. All rights reserved. All other trademarks mentioned in this document or website are the property of their respective owners and does not imply or indicate any approval, endorsement,
sponsorship, or affiliation with such owners unless such approval, endorsement, sponsorship, or affiliation is expressly indicated.
I. Introduction
The
ETP-CI-4G-GSM
is used in conjunction with an ETP-500 Series ADA-compliant, hands-free Emergency
Phone.
II. Prerequisite Cellular Service Requirements
Prior to installation and setup, the
ETP-CI-4G-GSM
Cellular Interface has the following perquisite requirements:
(1) 4G Voice over LTE service from a local cellular service provider that supports GSM (e.g. AT&T,
T-Mobile);
(2) An activated micro-SIM (3FF) card provided by the local cellular service provider.
III.
Contents
Before beginning installation, make sure you have all the included components. The
ETP-CI-4G-GSM
includes:
Qty.
Part Number
Description
1
68746
ETP-CI-4G-GSM Cellular Interface
1
160-00049
MIMO antenna kit (includes antenna with built-in cable
assembly)
2
4247
8-32 x 1/2 BH Screw
2
4248
8-32 x 5/16 Hex Nut
2
42767
#10 External Lock Washer
IMPORTANT NOTE:
Programming of the ETP-500 Series Phones cannot be done through a
remote call to the ETP-CI-4G-GSM Cellular Interface. For programming, an ETP-500 Series Phone
must be connected directly to a standard analog phone line connection.
