The Mini Wilson™
Patent Pending
Instructions for using the Mini Wilson™
Congratulations on purchasing
The Mini Wilson™
, a state-of-the art digital voice
card recorder. The following are instructions for its use:
Batteries
The Mini Wilson™
requires two (2) standard lithium batteries model CR2032.
Two are already pre-installed.
Before operating the unit slide the batter compartment outwards and remove the
battery insulation tab from the edge of
The Mini Wilson™
.
Note: When batteries are removed and replaced,
The Mini Wilson™
will retain
all existing messages.
Recording
To record, press the Record button (REC). After the beep, speak in the direction
of
The Mini Wilson™
. The recoding indicator LED light will flash, indicating that
The Mini Wilson is recording. During recording, pressing the PAUSE button will
pause the recording. Press the PAUSE button again to resume the recording.
To stop recording press the Play/Stop button (
►
■
).
The Mini Wilson™
will
beep twice, indicating that the recoding has stopped. Alternatively,
The Mini
Wilson™
will automatically cease recoding if the memory is full (the LED will turn
off.)
Your can record messages for a total recoding time of up to 1 hour.
Play Back
To play back your message, simply press the Play/Stop button (
►
■
).
The Mini
Wilson™
will play back the most recently recorded message first. Each time the
