TALEX Spółka z ograniczoną odpowiedzialnością
Spółka komandytowa
ul. Dworcowa 9c
77-141 Borzytuchom
tel. (59) 821 13 40
e-mail.
Page
22
of
59
9.3 Folding and unfolding of safety barriers
For the security reasons the access of the user and the bystanders to the hazard zones on
the machine should be appropriately restricted. The machine is equipped with the safety
barriers to minimalize the risk of accidental contact with the raking assembly whilst at work.
The barriers should be lowered down after setting the arms for work and before powering
the machine up. The barriers should stay in horizontal position at all times during work and
after disengaging the power when the rotor is still in motion.
In order to lower down the safety barrier, grip the handle of the locking bolt firmly and pull it
towards yourself to overcome the tension of the spring until you feel the resistance. Then
grip the safety barrier with the other hand, pull it slightly outwards to free it from the locking
socket and release the bolt. Grip the barrier with both hands and pull it down with force
sufficient to overcome the tension of the safety spring, until it stops on the rubber buffers
mounted on the frame. Exercise special care lowering down the barrier and do not stand in
the movement zone of the barrier to avoid crushing risk.
Figure 6. Unfolding of the safety barriers
