Page
67
of
129
SELF-LOADING BALE WRAPPER
SPRINTER 1500
way involves holding down the button for the operation to be carried out until the button is released. The
operation is terminated at any time after removing the finger from the button.
In order to facilitate the work for the operator, the screen comes with a positioning key ”POSITION”.
Select it to rotate the rotary frame to move it to the next sensor in an anticlockwise direction. Pausing or
stopping the operation will pause the counting of wraps and using the key will resume it.
8.3.3
MANUAL Mode
In the “MANUAL” mode, all operations are confirmed by the operator who holds down a control button
for the section required. Removing your finger from the button terminates the operation of the section.
Keys for controlling sections:
Manual control screen:
Summary of Contents for SPRINTER 1500
