Talex SPRINTER 1500, Original User Manual, Page: 36 / 129

Page 36 of 129
SELF-LOADING BALE WRAPPER
SPRINTER 1500
6.3 Levelling the bale wrapper
Level the bale wrapper before use. To do this, position the machine on level ground, adjust the level with
the crank in the support foot and then adjust the height of the drawbar relative to its mount in the
tractor.
Figure 19 Drawbar position adjustment
(1) bolt connection, (2) drawbar, (3) sleeves
The machine must be levelled before it is coupled with the tractor. When setting the machine
horizontally, pay particular attention to the position of the drawbar hitch and, if necessary, adjust it to the
mounting height on the tractor. This job requires the drawbar hitch (2) to be removed by unscrewing the
fixing screws (1) together with the sleeves (3) using a wrench in size 24. Then set the drawbar eye at the
height of the hitch on the tractor and fix it to the machine with the bolts (1), remembering to install the
spacer sleeves (3) beforehand.
6.4. Transport position
The grab arm is lifted and locked mechanically in the transport position, see Figure 20. Before starting
work in the field, remove the locking flat bar (3) from the bale grab (Figure 20) by removing the locking
pin (2) from the pin (1) to remove the flat bar and put it securely in the working position (Figure 21).