TAKEBISHI MITSUBISHI ELECTRIC MELSEC iQ-R Series, User Manual

Page: 27 / 62

5 LICENSE MANAGEMENT
5.2 Deleting a License File
25
5
5.2
Deleting a License File
This section shows the methods for deleting a license file.
Certification of a license fails in the following cases. If it fails, delete an invalid license file and register a valid one.
• An incorrect license file is registered.
• A failure occurs in an MES interface module that has succeeded in certification of a license, and the SD memory card is
used for another MES interface module.
Using MES Interface Function Configuration Tool
The following shows the deletion procedure using MES Interface Function Configuration Tool.
Operating procedure
1.
Select [Online]

[Manage MES Interface Module] in MES Interface Function Configuration Tool.
2.
Select a target option driver body in "Option Driver List" in the [Option Driver Management] tab.
3.
Click the [Delete] button.
Precautions
If a target option driver body is not displayed, perform this procedure after installing an option driver body or delete a license
file by using an SD memory card.