TAKEBISHI MITSUBISHI ELECTRIC MELSEC iQ-R Series, User Manual

Page: 25 / 62

5 LICENSE MANAGEMENT
5.1 Registering a License File
23
5
5
LICENSE MANAGEMENT
This chapter shows the methods for managing licenses.
For checking the certification status of a license, refer to the following:

Page 28 Checking the Certification Status of a License
5.1
Registering a License File
This section shows the methods for registering a license file.
Considerations
• Make sure that the product information entered when acquiring a license file matches that of a target MES interface
module.
• A license file is retained in an SD memory card inserted into an MES interface module. Note that a license file is deleted if
formatting an SD memory card.
• If registration of the license file of an option driver fails during temporary authentication, the certification of the license file
also fails and the option driver may not be available. In this case, the state in which the option driver is temporarily
authenticated can be restored by deleting the license file.
Using MES Interface Function Configuration Tool
The following shows the registration procedure using MES Interface Function Configuration Tool.
Operating procedure
1.
Select [Online]  [Manage MES Interface Module] in MES Interface Function Configuration Tool.
2.
Click the [Register] button in the [Option Driver Management] tab.
3.
Select a license file saved in the following section, and click the [Open] button.

Page 14 Acquiring a License File