TAKASAGO HX-S-G2 Series, Instruction Manual

Page: 53 / 240

Useful Function
53
Using the Sequential Function
Output is turned ON/OFF after delay time (tdon,
tdoff) that are set for each machine triggered by
OUTPUTON signal of the sequential master.
Sequential Master
HX-G
＃１
(
＋５Ｖ
)
Sequential Slave
HX-G
＃２
(
＋１２Ｖ
)
Sequential Slave
HX-G
＃ｎ
(
－１２Ｖ
)
Output set ON/OFF with
the HX-G #1 OUTPUT key
td1 on td1 off
td2 off
td3 off
td3 on
td2 on
ON OFF
ON
OFF
ON
OFF
ON
OFF
Ex)
Setting Procedures
Set Sequential ON/OFF to ON.
Press The Function “FUNC.” key.
The FUNC. lamp will light.
The Setting Item Number will be displayed in the Number
Display (voltage) and the parameter will be displayed in
the Number Display (current).
Select Item Number 6 with the VOLTAGE dial, then set the
parameter to 1 with the CURRENT dial.
Set the Delay Time
ON-Delay Time and OFF-Delay Time settings have a range of
0.00s~99.99s.
Factory default is 0.00s (no delay time).
Setting ON-Delay Time
Select Item Number 7 with the VOLTAGE dial. Set ON-Delay
Time with the CURRENT dial.
Setting OFF-Delay Time
Select Item Number 8 with the VOLTAGE dial. Set OFF-Delay
Time with the CURRENT dial.

Continued on next page
For sequential master machines, delay
time
(tdon, tdoff) can also be set.
MEMO
Setting ON-Delay Time (Ex: 33.33s is specified)
Setting OFF-Delay Time (Ex: 11.11s is specified)