6
Precautions for Use
●
Do not use for any purpose other than hair and beauty salon treatment
This product is an industrial appliance for use in hair and beauty salons. Please avoid the use of the
product outside these purposes.
The product must only be used by those who have undergone appropriate training, such as hair
stylists and aestheticians.
●
Be sure to secure sufficient supply of hot water
Stable output of hot water in cascade form requires hot water supply of at least 8.6 L/min.
Special caution will be required because the use of a dual function shower head with hot/cold water
supplied at a pressure of 0.1 MPa will result in a shower output rate of about 10 L/min for the YUME,
YUME DX, YUME ESPOIR, YUME SWING, YUME SUITE, and YUME NOBLE, about 8.0 L/min for
W SWING YUME, and about 8.5 L/min for the YUME OASIS backwash basin, and about 9.5 L/ min for
the YUME OASIS sidewash basin.
●
Remove the product when not in use
Coming into contact with the product when washing the hair may result in injury.
●
Avoid holding the nozzle cover
This may cause nozzle cover breakage.
●
Wipe off any chemicals that adhere to the product
If chemicals adhere to the product, immediately wipe these off with a dry cloth because such contact
may result in degeneration and discolouration.
●
Avoid applying heat of 60°C or higher
This may result in degeneration and discolouration.
●
Avoid the use of mint oil and aroma oils
This may result in degeneration and damage.
●
Avoid the use of polishing agents
Do not use polishing agents when cleaning the product.
The use of polishing agents, sponges containing polishing agents, or hard cleaning equipment, such
as wire wool and nylon scrub sponges, may cause scarring.
●
Shower head of the wash unit must be returned to the shower head holder so that the shower head
plate is facing towards the basin
When water is released, the hot water may spill outside the basin or come into contact with the
customer.
●
Do not use the dedicated storage bag for purposes other than product storage
Use for purposes other than product storage may damage the bag.
●
After treatment, store the product in the dedicated storage bag and place on a flat surface
Storage of the product in an unstable location may cause the product to fall and become damaged.
●
Avoid moving the basin while the product is set to the basin
This may cause the product to fall and break.
●
Insert the shower head of the wash unit securely to the shower head holder
If the shower head is not inserted sufficiently, it will not be held securely by the shower head holder.
This may cause the direction of the shower head to change when water is released, resulting in the
water coming into contact with the customer.
Summary of Contents for AY-YHBSS Series
Page 23: ...23 Notes...
