12
Inner Bowl Setup
Attach the inner bowl
Lift the customer’s head and place the convex part
of the inner bowl on top of the concave part of the
rubber cover on both the right and left sides to
attach the inner bowl.
CAUTION
・
Be careful not to get the
customer’s hair caught during
setup.
・
Avoid the inner bowl coming
into contact with the customer
１
Check that the nozzle arch is tilted
towards the front
Performing Treatment
CAUTION
Be sure to use a face towel because hot water may splash the customer’s face, or
simultaneous use of other devices that share the same source of cold or hot water
may cause changes in water pressure and lead to unstable water output, which
may also cause the hot water to come into contact with the customer’s face.
Inner bowl
Convex part of the inner bowl
Concave part of the rubber cover
* Check that neck seal is not folded, as this may
prevent the water from being held in the basin.
Nozzle arch
Neck seal
Front side
Summary of Contents for AY-YHBSS Series
Page 23: ...23 Notes...
