TR-1 Operator manual
861-081
3
3. Raising the handle to its working position
Operation is on level ground and in safe location.
Take off the safety fitting of the unit and open the
handle stopper.
Lift up the handle bar.
Taking care not to let go until they are all the way
back.
Close the handle stop and lock the safety fitting.
Open the height adjustment lever to extend the
handle length to a comfortable working height.
After adjusting the height, fix it by closing the lever.
4. Adjusting the display angle
Please turn the coupling lever counterclockwise until
the handlebar and the monitor move freely.
Adjust to the comfortable working angle and turn the
coupling lever clockwise (in the opposite direction)
until held firm.
Be careful, do not overtighten.
The monitor is tightened and fixed to a handlebar.
When adjusting the angle, please loosen the bolt
having hexagon hole by the hexagon wrench.
After the adjustment of the angle, please tighten it
again.
