TAJIMA TLMX Series, User Manual

Page: 227 / 318

To move the frame to the position registered
212
Chapter 7
SQ01
5-2. To move the frame automatically at the start, in the middle and the end of embroidery
This function is the setting to move the frame automatically so that replacement of the frame, works for
applique and change of fabric to be stretched can be performed easily.
The following is an example of movement when the setting of "Auto Color Change (AC) / Auto Start (AS)",
"Automatic Thread Trimming" is "YES".
[In case of FM head]
(1) At the start of embroidery, the frame will pass through the offset middle position [B] from the offset start
position [A] by the bar switch or the start switch operation (hereafter, the switch operation) and move to
the design start position [C], then the embroidery will start.
(2)
In the middle of embroidery, the frame will pass through the offset middle position [B] from the color
change point [D] and move to the offset start position [A]. After performing works for applique here, the
frame will pass through the offset middle position [B], move to the color change point [D], then start em-
broidery.
(3) At the end of embroidery, the frame will pass through the offset middle position [B] from the design end
point [E] and move to the offset start position [A].
[In case of LM head]
(1) At the start of embroidery, the frame will pass through the offset middle position [B] from the offset start
position [A] by the bar switch or the start switch operation (hereafter, the switch operation) and move to
the design start position [C].
(2)
The embroidery will start by the switch operation.
(3) In the middle of embroidery, the machine stops at the color change point [D]. The frame will pass through
the offset middle position [B] from the color change point [D] by the switch operation and move to the
offset start position [A].
(4)
The frame will move to the color change point [D] by the switch operation.
(5)
The embroidery will start by the switch operation.
(6) At the end of embroidery, the machine stops. The frame will pass through the offset middle position [B]
from the design end point [E] by the switch operation and move to the offset start position [A].
[A]
[C]
[B]
[B]
Embroidery starts During embroidery
[E]
[A]
Completion of embroidery
[D]