TAJIMA TFMX-IIC, User Manual

Page: 32 / 268

How to use each part
18
Chapter 2
2.
How to use each part
2-1. Operation panel
2-1-1.
Front
F1
A
AS FB
B C
E
SET
D1 D2
F2 F3 F4
F5 F6
3. Design confirming mode key (i key in this manual)
( → p.29)
It is possible to check the detail of the design to be
embroidered from now.
4. Jog dial
Move the frame at low speed.
5. Jog shuttle
Move the frame at high speed.
It is illustrated as below in this
manual.
It is illustrated as below
in this manual.
1. Sleep mode key( → p.22)
Switch to power save mode. To release, press
this key again.
2. Condition of the machine
AS (Auto Start)
To perform: Lit
Not to perform: Unlit
FB (frame back / foward)( → p.69)
Frame Back: Lit
Frame Forward: Unlit
(Main shaft stop position)
Fixed position: Lit (normal)
Other than the fixed position: Unlit
(abnormal)
Lower dead point, or main shaft brake
"NO": Blinking
(FDD)
Not used currently
(USB port)
During operation: Lit
1 2 5 3 4