TAJIMA SAI MDP-S0801C(200x300)S Operation Manual Download Page 49

Page: 49 / 110

Chapter 4 Getting the Most Out of the Machine

Designs from the dedicated design creation software or a separately available DG product on a PC can
be loaded into the machine after it has been connected to the PC using a LAN cable.

Turn off the machine's power switch.

Connect the LAN cable to the PC's LAN port, or to the LAN port on the router or hub.

Connect the LAN cable to the LAN port on the right
side of the machine.

Start up the PC, and then start up the design
creation software.

Turn on the machine's power switch.

Tap

on the Home screen.

The Design Load screen is displayed.

Using the design creation software, send the
design to the machine.

For information on how to use the design creation software, refer to the manual for the design
creation software.

4.4 Loading a design from a PC using a LAN cable

If you want to directly connect the PC to the machine, you will need to prepare a commercially
available cross-cable.

If connecting the machine to a network (router or hub), prepare a commercially available straight
cable.

Network information for the machine needs to be set beforehand.

"6.3 Performing network settings"

Summary of Contents for SAI MDP-S0801C(200x300)S















































































































Search results

Summary of Contents for SAI MDP-S0801C(200x300)S

Reviews:

Related manuals for SAI MDP-S0801C(200x300)S

Brands by name

Popular brands

TAJIMA SAI MDP-S0801C(200x300)S, Operation Manual

Search results

Summary of Contents for SAI MDP-S0801C(200x300)S

Reviews:

Related manuals for SAI MDP-S0801C(200x300)S

Brands by name

Popular brands