34
Chapter 3 How to Perform Embroidery
3
By using the trace function, which moves the frame in accordance with the contour of the design, you
can find out whether the embroidery design is appropriate or not, and whether the allowable area for
embroidery will be exceeded or not.
1.
Tap
on the Trace screen.
The confirmation screen is displayed.
2.
Tap [YES].
The laser crosshair marker lights, the frame moves in
accordance with the contour of the design, and traces the path
shown to the right.
While the trace is in progress, an hourglass is displayed on the
screen. This indication disappears when the trace is completed.
3.2.5 Confirming that the design fits within the embroidery area
Caution
Keep hands away from the area surrounding the frame and needle bar case while the trace is being
carried out. Otherwise, there is a risk of injury due to the movement of the frame and needle bar
case.
If the needle position is not at the position of the laser crosshair marker before the trace is
started, the needle position moves to the position of the laser crosshair marker first, and after
that, the trace starts.
If you want to change the embroidery position, use the
icon to display the frame travel
keys, and then move the frame.
To pause a trace while it is in progress, press the [STOP] button on the operation panel. To
continue the trace, tap [YES] in the confirmation screen; to cancel it, tap [NO].
If the design will not fit in the frame, an error screen (225) is displayed. Tap [RESET], and use
the
icon to display the frame travel keys, and then move the frame.
