Tait TP9400 Series P25 User Manual Download Page 84

Page: 84 / 178

84 Operating in P25 trunking mode

Unconnected calls

If your call is not connected, the way your radio
behaves is explained in the following table.

Radio behavior

Explanation

The system is too busy to process your
talkgroup or individual call.

The radio sounds three
short beeps.

The system is now available to process your
talkgroup or individual call.

The radio sounds five
beeps, followed by a
repeating double beep.

You have selected a talkgroup that does not
currently exist on the system. Your display
shows that you have lost service and

longer appears.
See

"Service is lost" on page 77

The radio sounds two
short beeps.

You have attempted to make an individual
call to a radio that does not currently exist
on the system.

You have attempted to make an individual or
phone call, but you are not authorized to do
this.

The radio sounds two
short beeps.

Your individual or phone call has been
rejected or is unanswered.

System
queued

Busy channel
now free

Talkgroup 1

No service

No answer

Summary of Contents for TP9400 Series P25



















































































































































































Search results

Summary of Contents for TP9400 Series P25

Reviews:

Brands by name

Popular brands

Tait TP9400 Series P25, User Manual

Search results

Summary of Contents for TP9400 Series P25

Reviews:

Brands by name

Popular brands