manualshive.com logo in svg

Tait TP9310, User Manual, Page: 65 / 80

Share
Download
Tait TP9310 User Manual Download Page 65

 Charging and caring for batteries  65

 

Removing the battery from the 

charger

■

Desktop charger and 6-way charger: Lift the bat-
tery/radio out of the charger.

■

Battery-only vehicle charger: Pull up the top clip of 
the vehicle charger, and then lift out the battery.

■

Vehicle charger: Press down once firmly on the 
release bar at the top of the vehicle charger, and 
then lift out the radio.

You can remove a battery/radio from the charger at 
any time without harming the battery, the radio, or the 
charger. When you return the battery/radio to the 
charger, charging is automatically resumed. You can 
also leave a battery/radio in the charger once 
charging is complete.

Maintaining battery life and 

performance

With proper care and maintenance you will maintain 
the performance and life of the battery. It is 
recommended that you:

■

Use only Tait chargers and batteries.

■

Do not expose a battery to very high or very low 
temperatures for extended periods of time. Doing 
so will shorten the service life of the battery.

 

Very high: above 140 °F (60 °C)

 

Very low: less than –4 °F (–20 °C)

■

Charge the battery at a room temperature of 
between 50 °F and 77 °F (between 10 °C and 
25 °C). This temperature range is the optimal 
charging range.

■

Wipe excess moisture and dirt from the radio, 
radio contacts and battery contacts before charg-
ing the battery.

Summary of Contents for TP9310

















































































Reviews:

No comments