Tait TP9100 User Manual Download Page 70

Page: 70 / 100

54 About battery charging

Char

ing and caring

for batteries

Charging the battery

Important:

If you are charging the battery for the first

time, follow the instructions on page 4.

Ensure that the charger is connected to the correct
Tait power adaptor.

Put the battery in the charger.

Note:

If you’re putting the radio in the charger as

well, you can leave it turned on if you're expecting a
call. The battery still receives a full charge.

If a radio is attached, the ‘battery in charger’

symbol appears in the radio display.

The red ‘Charging’ LED glows to indicate that the
battery is charging. For a battery that is almost
completely discharged, allow 2 hours.

Note:

If the amber ‘Fault’ LED lights up, refer to

“Troubleshooting your charger” on page 61.

When the green ‘Ready’ LED on the charger glows,
the battery is fully charged. Remove it when you are
ready—the charger will not overcharge the battery.

You can put the battery in the
charger either

with

without

the radio

Summary of Contents for TP9100





































































































Search results

Summary of Contents for TP9100

Reviews:

Brands by name

Popular brands

Tait TP9100, User Manual

Search results

Summary of Contents for TP9100

Reviews:

Brands by name

Popular brands