Tait TP9100, Service Manual, Page: 6 / 326

6
TP9100 Service Manual
© Tait Electronics Limited May 2005
Copyright
All information contained in this manual is the property of
Tait Electronics Ltd. All rights are reserved. This manual may not, in whole
or in part, be copied, photocopied, reproduced, translated, stored, or
reduced to any electronic medium or machine-readable form, without prior
written permission from Tait Electronics Ltd.
All trade names referenced are the service mark, trademark or registered
trademark of the respective manufacturers.
Disclaimer
There are no warranties extended or granted by this manual.
Tait Electronics Ltd accepts no responsibility for damage arising from use of
the information contained in the manual or of the equipment and software
it describes. It is the responsibility of the user to ensure that use of such
information, equipment and software complies with the laws, rules and
regulations of the applicable jurisdictions.
Associated Documentation
The following associated documentation is available for this product:
■
MPA-00004- xx TP9100 Product Safety and Compliance Information
■
MPA-00001- xx TP9100 User’s Guide
■
MPA-00006- xx TP9100 Main Board (B1) PCB Information
■
MPA-00007- xx TP9100 Main Board (H5) PCB Information
■
MPA-00008- xx TP9100 Main Board (H6) PCB Information
■
MPA-00009- xx TP9100 Front-Panel Interface Board
PCB Information
■
MPA-00010- xx TP9100 Accessory and UI Flex Boards
PCB Information
■
MPA-00011- xx TP9100 PCB Information
(printed, pre-punched and shrink wrapped;
comprises MPA-00006-
xx to MPA-00009- xx )
The characters xx represent the issue number of the documentation.
All available documentation is provided on the
TM9100/TP9100 Service CD, product code TMAA24-01.
Updates may also be published on the Tait support website.