Tait TP9100 Series P25 User Manual Download Page 137

Page: 137 / 168

Charging and caring for batteries 137

LED behavior

If there is a battery in the charger when power is
supplied to the charger, the LEDs behave as follows:

If the charger does not behave as expected:

■

Make sure the radio or battery is seated properly
in the charger.

■

Check that the charger is properly plugged in.

■

Check that the battery and charger contacts are
clean. To clean, wipe the contacts with a dry lint-
free cloth to remove any dirt, oil or grease.

LEDs

Meaning

briefly

The charger has been connected to a
power supply

flashing

A NiMH battery is being primed.
If possible, do not interrupt until the green
LED is lit

steady

The battery is charging

steady

Charging complete. Remove the battery,
or leave it in the charger.

steady

The battery temperature is outside the
normal charging range. Charging will start
or resume once the temperature is within
normal limits. No action is required by you.

flashing

There is a fault. See

"Troubleshooting the

charger" on page 147

There is a fault. See

"Troubleshooting the

charger" on page 147

Summary of Contents for TP9100 Series P25









































































































































































Search results

Summary of Contents for TP9100 Series P25

Reviews:

Tait TP9100 Series P25, User Manual, Page: 137 / 168

Search results

Summary of Contents for TP9100 Series P25

Reviews: