manualshive.com logo in svg

Tait TP8135, User Manual, Page: 52 / 120

Share
Download
Tait TP8135 User Manual Download Page 52

52

Unconnected calls

If your call is not connected, your radio responds with one of the 
following messages:

■

If the display reads 

ENGAGED

, the radio you are calling is 

already busy. Try your call again later.

■

If the display reads 

QUEUED

, the radio you are calling has 

queued your call. Wait for the radio to call you back, or try your 
call again later.

■

If the display reads 

SYS

 

BUSY

, the system is too busy to handle 

your call. Try your call again later.

■

If the display reads 

NOT

 

HOME

, the radio you are calling has 

their radio switched off, in ‘do not disturb’ mode or is out of 
range. Try your call again later.

■

If the display reads 

WAIT

 

QUE

, the system is not able to connect 

your call straight away but queues it and connects it as soon as 
possible.

■

If the display reads 

UNAVAIL

, your radio is not permitted to 

make the type of call you requested.

■

If the display reads 

UNOBTAIN

, the number you called is not 

supported.

Summary of Contents for TP8135

























































































































Reviews:

No comments