Tait TM9456 User Manual Download Page 72

Page: 72 / 129

72 Operating in P25 trunking mode

Unconnected calls

If your call is not connected, the way your radio
behaves is explained in the following table.

Radio behavior

Explanation

The system is too busy to process
your talkgroup or individual call.

The radio sounds
three short beeps.

The system is now available to
process your talkgroup or
individual call.

The radio sounds five
beeps, followed by a
repeating double
beep.

You have selected a talkgroup that
does not currently exist on the
system. Your display shows that
you have lost service and

longer appears.
See

“Service is lost” on page 63

The radio sounds two
short beeps.

You have attempted to make an
individual call to a radio that does
not currently exist on the system.

You have attempted to make an
individual or phone call, but you are
not authorized to do this.

The radio sounds two
short beeps.

Your individual or phone call has
been rejected or is unanswered.

System
queued

Busy channel
now free

Talkgroup 1

No service

No answer

Summary of Contents for TM9456


































































































































Search results

Summary of Contents for TM9456

Reviews:

Related manuals for TM9456

Brands by name

Popular brands

Tait TM9456, User Manual

Search results

Summary of Contents for TM9456

Reviews:

Related manuals for TM9456

Brands by name

Popular brands