70 Operating in P25 trunking mode
You may still be able to communicate with your
dispatcher and other talkgroup members, depending on
the type of system failure that has occurred, and how
your radio is programmed.
When the trunking system returns to normal operation,
your radio is notified, and will attempt to register on the
control channel it was previously using.
Dynamic regrouping
The dynamic regrouping feature allows you to send a
dynamic regrouping request to your dispatcher. Your
dispatcher can then reassign your radio to a special
communications group.
Note:
While you are operating on this group, normal
channel selection may be disabled.
To send a dynamic regrouping request:
■
Press
Menu
and select
Trunking
>
Dyn Regrouping
.
When you press
Select
, a message appears in
the display.
If the request is successful, an acknowledgement
message is displayed.
Sending
dynamic
regroup rqst
Cancel
Ack received
OK
Summary of Contents for TM9100
