10
Preparing the U-Bracket Installation
TM8100/TM8200 Installation Guide
© Tait Limited
October 2012
2
Preparing the U-Bracket Installation
This section contains the following information:
■
installation tools
■
checking the equipment for completeness
■
choosing an installation configuration
2.1
Installation Tools
The following tools are required to install the radio:
■
drill and drill bits
■
Pozidriv screwdriver
■
5/16 inch (8mm) socket
■
RF connector crimp tool
■
fuse crimp tool
■
in-line RF power meter capable of measuring forward and reflected
power at the operating frequency of the radio
2.2
Checking the Equipment for Completeness
Unpack the radio and check that you have the following:
1.
A radio body with one of the following product codes:
■
TMAB32: 25W radio
■
TMAB34: >25W radio
2.
A control head with one of the following product codes:
■
TMAC41 control head (including control-head loom)
■
TMAC70 hand-held control head, with TMAC34 remote control
head, and TMAA10-06 remote speaker (>25W radio) or
TMAA10-03 remote speaker (25W radio)
3.
TMAA02-01 microphone, TMAA02-08 keypad microphone,
(including microphone clip and screws) (not required for installations
with TMAC70 hand-held control head).
4.
A TMAA03-17 installation kit (>25W radio) or TMAA03-01
installation kit (25W radio), consisting of the following items:
■
U-bracket
■
thumbscrews
■
self-drilling screws and washers
■
power cable with DC connector
■
fuses
>25W
25W
>25W
25W
