TM8260 Installation and Programming Guide
Installing a Dual-Radio System
35
© Tait Limited
October 2014
Installing a Hand-Held Control Head
contains an overview of the connection between the radio
bodies and a hand-held control head.
If a radio body does not have link J4 removed, or you cannot identify the
correct radio body to use, you will need to disassemble one or both inter-
faces. See
“Removing the Body Interface” on page 22
for more infor-
mation.
1.
Attach the hand-held control head cord to the innermost port of the
radio body with link J4 removed.
The outermost port of this radio body connects to the other radio body.
2.
Install the cable grommet. See
“Removing and Installing Grommets”
.
3.
Install the control head mounting clip in the most convenient
location for the radio user.
Figure 3.11
Connecting radio bodies to hand-held control head
Body with link J4 removed
To radio
body with
link J4 fitted
Outermost
port
Innermost
port
Hand-held
control head
Hand-held control head curly cord
(
may include extension TMAA04-14 to -17)
