manualshive.com logo in svg

Tait TB8100, User Manual

Share
Download
Tait TB8100 User Manual Download Page 30

20 Part B: Getting Started

   © Tait Electronics Limited December 2007

Monitoring Alarms

When you are logged on to a base station, the Service Kit regularly polls the 
base station for alarms. If an alarm is detected, a flashing Alarms icon appears in 
the status bar. If the Alarms icon disappears, the Service Kit has detected that 
the alarm was cleared.

To monitor alarms

1. Check the status bar. If it has a flashing Alarms icon, click the Alarms button 

on the toolbar. This opens the Current Status form.

2. Look to see which LED is flashing red. A flashing LED means that the alarm 

is on. One problem can set off more than one alarm. 

Tip: 

To view a list of recent alarms, select Monitor > Alarms > 

Reported Alarms. 

Note: 

Most monitoring forms have an Alarm Status LED, which 

indicates whether the module has any active alarms.

Summary of Contents for TB8100































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands