Tait Orca 5000 User Manual Download Page 75

Page: 75 / 89

Maintaining Your Radio

int

ing Y

Note: If the message

BATTERY IS FLAT

displays,

the battery is too low, and the radio will stop
operating. Turn off the radio immediately and
recharge.

Short condition the radio’s battery:

■

Weekly.

Long condition the radio’s battery:

■

When battery performance has deteriorated.

■

Following prolonged storage.

Charging the Battery

Do not press the blue conditioning button
when charging the battery – this button is only
used for conditioning the battery.

To charge the battery:

Turn off the radio.

Insert the battery/radio into the charger (the charger
LED glows red).

When the charger LED glows steady green, the battery
is charged.

Note: For up to 30 minutes after removing
the battery from the charger, the battery
indicator will not accurately reflect the
battery’s charge.

Battery charging involves three stages:

Stage

Function

LED Indicator

Fast

charge

Brings the battery up to near

full capacity.

Glows red.

Trickle

charge

Slowly tops up the battery until

it is at its full capacity.

Flashes green.

Stand-by

charge

Keeps the battery at its full

capacity, as long as the radio is

turned off.

Glows steady

green.

Summary of Contents for Orca 5000


























































































Search results

Summary of Contents for Orca 5000

Reviews:

Related manuals for Orca 5000

Brands by name

Popular brands

Tait Orca 5000, User Manual

Search results

Summary of Contents for Orca 5000

Reviews:

Related manuals for Orca 5000

Brands by name

Popular brands